When I got my son his 07 CRF250 I put softer springs in it cause he was small. When I took the fork springs out I neglected to mark them as the OEM springs. Since then I have changed springs on my old 05 CRF450, but Im 99% sure I got rid of them. Here is my problem. I am about to put the stock springs back in the CRF250...........the springs I have that I
THINK are the OEM that should be .45 kg/mm do not have the marks the manual says they ought to have which is: 1. no mark at all for OEM .45 OR 1 scribe mark for aftermarket .45. As you can see by the below pic, these springs have 2 scribe marks 15 degrees apart. This scribe configuration matches nothing in my honda manuals for my 05 450 or the 07 250, stock or optional stiffer or softer springs. All aftermarket springs that I have purchased in the past have all been factory connection springs if that helps........
The only forks I have had apart are the 450 & 250 forks, so these have GOT to be the OEM .45's but before I put them back Id' like to be sure they are the right ones...............
Linear Mode
